Gipfel Engineering
Linkedin Facebook Instagram Youtube

Products .

Filters

Component Mechanical Seal
Engineered Mechanical Seal
Gas Seal
Labyrinth Seal
Rotary Joint
Seal Support System
API Mechanical Seal
Other Product Lines

Product Range

Star Mechanical Seal
ST100 - ST105 (Star Type Mechanical Seal)
  • Single Seal
  • Pusher Type
  • Parallel Spring
  • Internal Mounted
  • Balance & Un-Balanced Type
  • Dependent on direction of rotation
Conical Spring Mechanical Seal
CS110 / CS115 (Conical Spring Type Mechanical Seal)
  • Single Seal
  • Pusher Type
  • Conical Spring
  • Internal Mounted
  • Balance & Un – Balance Type
  • Dependent on Direction of Rotation
  • Torque Transmission by Conical Helical Spring
Single Spring Mechanical Seal
SS120 / SS125 (Single Spring Mechanical Seal)
  • Single Seal
  • Pusher Type
  • Internal Mounted
  • Single Helical Coil Spring
  • Balance & Un-Balanced Type
  • In Dependent on Direction of Rotation
  • Universal Chemical Compatibility due to PTFE Elastomer
Multi Spring Balanced Type Mechanical Seal
MS200 [Multi Spring Mechanical Seal (Balanced Type)]
  • Single Seal
  • Pusher Type
  • Balance Type
  • Rotating Spring
  • Multiple Spring Type
  • Internal & External Mounted
  • Independent of direction of rotation
Un-Balance Mechanical Seal
MS210 [Multi Spring Mechanical Seal (Un-Balanced Type)]
  • Single Seal
  • Pusher Type
  • Rotating Spring
  • Un-Balance Type
  • Multiple Spring Type
  • Internal & External Mounted
  • Independent of direction of rotation
Multi Spring Reverse Balance Seal
MR220 [Multi Spring Mechanical Seal (Reverse Pressure Balanced Type)]
  • Single Seal
  • Pusher Type
  • Rotating Spring
  • External Mounted
  • Multiple Spring Type
  • Reverse Pressure Balanced Type
  • Independent of Direction of Rotation
Multi Spring Mechanical Seal (Non-Clogged Type)
MI250C [Multi Spring Mechanical Seal (Non-Clogged Type)]
  • Single Seal
  • Pusher Type
  • Rotating Spring
  • No Shaft Fretting
  • Multiple Spring Type
  • Stable Drive Pins / Lugs
  • Balance / Un-Balance Type
  • Internal / External Mounted
  • Independent of Direction of Rotation
  • Springs are outside the Media (Non Clogged)
Rubber Bellow Mechanical Seal
RB10 [Rubber Bellow Mechanical Seal (Equivalent to Eagle Burgmann MG1 Type)]
  • Single Seal
  • Pusher Type
  • Un – Balanced
  • Internal Mounted
  • Elastomeric Bellow
  • Rotating Single Spring
  • Single Helical Coil Spring
  • Low Cost & Mass Produced
  • Independent of Direction of Rotation
  • Torque Transmission by Spring Holder
MG12 Mechanical Seal
RB20 [Rubber Bellow Mechanical Seal (Equivalent to Eagle Burgmann MG12 Type)]
  • Single Seal
  • Pusher Type
  • Un – Balanced
  • Internal Mounted
  • Elastomeric Bellow
  • Rotating Single Spring
  • Single Helical Coil Spring
  • Low Cost & Mass Produced
  • Independent of Direction of Rotation
  • Torque Transmission by Spring Holder
RB30 Mechanical Seal
RB30 [Rubber Bellow Mechanical Seal (Equivalent to Eagle Burgmann MG13 Type)]
  • Single Seal
  • Pusher Type
  • Un – Balanced
  • Internal Mounted
  • Elastomeric Bellow
  • Rotating Single Spring
  • Single Helical Coil Spring
  • Low Cost & Mass Produced
  • Independent of Direction of Rotation
  • Torque Transmission by Spring Holder
Multi Spring Mechanical Seal (Equivalent to Flowserve RO Type)
MF260S - MF265S [Multi Spring Mechanical Seal (Equivalent to Flowserve RO Type)]
  • Single Seal
  • Pusher Type
  • Rotating Spring
  • Internal Mounted
  • Multiple Spring Type
  • Balance & Un-Balance Type
  • Independent of direction of rotation
Multi Spring Seal (Equivalent to ROTT Type)
MF270D - MF275D [Multi Spring Mechanical Seal (Equivalent to Flowserve ROTT Type)]
  • Pusher Type
  • Double Seal
  • Rotating Spring
  • Internal Mounted
  • Multiple Spring Type
  • Balance & Un-Balance Type
  • Independent of direction of rotation
placeholder-img
ME280D - ME285D [Multi Spring Mechanical Seal (Equivalent to Eagle Burgmann M74D Type)]
  • Double Seal
  • Pusher Type
  • Internal Mounted
  • Back To Back Arrangement
  • Rotating Multiple Spring Type
  • Independent of direction of rotation
  • Hydraulically Balance & Un-Balance Type
Wave Spring Mechanical Seal
WS300 - WS305 [Wave Spring Mechanical Seal (Equivalent to Eagle Burgmann M7N Type)]
  • Single Seal
  • Pusher Type
  • Internal Mounted
  • Wave Spring Loaded
  • Suitable for Short Space
  • Independent of direction of rotation
  • Hydraulically Balanced & Un Balance
Wave Spring Mechanical Seal
WS310 - WS315 (Wave Spring Mechanical Seal)
  • Single Seal
  • Pusher Type
  • Internal Mounted
  • Wave Spring Loaded
  • Suitable for Short Space
  • Independent of direction of rotation
  • Hydraulically Balanced & Un Balance
Wave Spring Mechanical Seal
WS320 - WS325 [Wave Spring Mechanical Seal (Equivalent to Eagle Burgmann HJ92N)]
  • Single Seal
  • Pusher Type
  • Internal Mounted
  • Wave Spring Loaded
  • Suitable for Short Space
  • Springs are outside the Media
  • Wave Spring Non-Clogged Design
  • Independent of direction of rotation
RB40 Mechanical Seal
RB40 [Rubber Bellow Mechanical Seal (Equivalent to John Crane 502 Type)]
  • Single Seal
  • Pusher Type
  • Un – Balanced
  • Internal Mounted
  • Elastomeric Bellow
  • Rotating Single Spring
  • Single Helical Coil Spring
  • Low Cost & Mass Produced
  • Independent of Direction of Rotation
  • Torque Transmission by Spring Holder
RB50 Mechanical Seal
RB50 [Rubber Bellow Mechanical Seal (Equivalent to John Crane 2100 Type)]
  • Single Seal
  • Pusher Type
  • Un – Balanced
  • Internal Mounted
  • Elastomeric Bellow
  • Rotating Single Spring
  • Single Helical Coil Spring
  • Low Cost & Mass Produced
  • Independent of Direction of Rotation
  • Torque Transmission by Spring Holder
RB60 Mechanical Seal
RB60 [Rubber Bellow Mechanical Seal (Equivalent to John Crane 21 Type)]
  • Single Seal
  • Pusher Type
  • Un – Balanced
  • Internal Mounted
  • Elastomeric Bellow
  • Rotating Single Spring
  • Single Helical Coil Spring
  • Low Cost & Mass Produced
  • Independent of Direction of Rotation
  • Torque Transmission by Spring Holder
TB400 Teflon Bellow Mechanical Seal
TB400 [Teflon Bellow Mechanical Seal (Multi Spring Type)]
  • Single Seal
  • Pusher Type
  • Un-Balanced
  • External Mounted
  • Rotary Multi Spring Type
  • Low Cost & Mass Produced
  • Independent of direction of rotation
TB410 Teflon Bellow Mechanical Seal
TB410 [Teflon Bellow Mechanical Seal (Replaceable Face Type)]
  • Single Seal
  • Pusher Type
  • Un-Balanced
  • Replaceable Face
  • External Mounted
  • Rotary Multi Spring Type
  • Low Cost & Mass Produced
  • Independent of direction of rotation
TB420 Teflon Bellow Mechanical Seal
TB420 [Teflon Bellow Mechanical Seal (Single Spring Type)]
  • Single Seal
  • Pusher Type
  • Un-Balanced
  • External Mounted
  • Rotary Single Spring Type
  • Low Cost & Mass Produced
  • Independent of direction of rotation
Metal Bellow Mechanical Seal
MB500 (Metal Bellow Mechanical Seal)
  • No Springs
  • Single Acting
  • Internal Mounted
  • Inherently Balanced
  • Edge Welded Bellows
  • Independent of direction of rotation
Metal Bellow Lug Type Mechanical Seal
MB510 (Metal Bellow Mechanical Seal)
  • No Springs
  • Single Acting
  • Internal Mounted
  • Inherently Balanced
  • Edge Welded Bellows
  • Independent of direction of rotation
MB520 Metal Bellow Mechanical Seal (Customn Design)
MB520 (Metal Bellow Mechanical Seal)
  • No Springs
  • Single Acting
  • Internal Mounted
  • Inherently Balanced
  • Edge Welded Bellows
  • Special Designed for Compressors
  • Independent of direction of rotation
SC600 - SC605 (Single Spring Single Cartridge Mechanical Seal)
SC600 - SC605 (Single Spring Single Cartridge Mechanical Seal)
  • Single Seal
  • Reduce Costs
  • Single Spring Type
  • Cartridge Construction
  • Balance & Un-Balance Type
  • Factory Assembled & Tested
  • Quick Install & Easy Removal
  • Metric and Inch Sizes Available
  • Independent of Direction of Rotation
  • Come With & without connection of Flushing & Quenching
SC610-[Single-Spring-Single-Cartridge-Type-(Equivalent-to-Grundfos-Standard)]
SC610G [Single Cartridge Type Mechanical Seal (Equivalent to Grundfos Standard)]
  • Single Seal
  • Cartridge Type
  • Internal Mounted
  • Hydraulically Balance
  • Rotating Single Spring
  • Quick Installation & Easy Removal
  • Independent of direction of rotation
SC615, SC620, SC625 & SC630 (Single Cartridge Type Mechanical Seal)
SC615, SC620, SC625 & SC630 [Single Cartridge Mechanical Seal (Multiple & Wave Spring Type)]
  • Single Seal
  • Cartridge Construction
  • Factory Assembled & Tested
  • Multiple & Wave Spring Type
  • Metric and Inch Sizes Available
  • Quick Installation & Easy Removal
  • Independent of Direction of Rotation
  • Hydraulically Balanced & Un-Balanced Type
  • Reduce costs because of Refurbishment Possibilities
  • Come with & without connection of Flushing & Quenching
DC640, DC650, DC660 & DC670 (Double Cartridge Mechanical Seal)
DC640, DC650, DC660 & DC670 (Double Cartridge Mechanical Seal)
  • Double Seal
  • Cartridge Construction
  • Tandem Arrangement
  • Face-to-Face Arrangement
  • Back-to-Back Arrangement
  • Face-to Back Arrangement
  • Factory Assembled & Tested
  • Multiple & Wave Spring Type
  • Metric and Inch Sizes Available
  • Quick Installation & Easy Removal
  • Rotary & Stationary Spring Design
  • Independent of Direction of Rotation
  • With connection of Flushing & Quenching
DC680F [Double Cartridge Seal (Equivalent to Flygt Pump Standard)]
DC680F [Double Cartridge Mechanical Seal (Equivalent to Flygt Pump Standard)]
  • Internal Mounted
  • Single & Double Seal
  • Rotary & Stationary Spring
  • Quick Installation & Easy Removal
  • Independent of direction of rotation
  • Semi Cartridge & Cartridge Construction
  • Hydraulically Balance & Un-Balance Type
SSC690 - SSC695 [Single Semi-Cartridge Seal)
SSC690 - SSC695 [Single Semi-Cartridge Seal (Multiple & Wave Spring Type)]
  • Single Seal
  • Reduce Costs
  • Balance & Un-Balance Type
  • Semi-Cartridge Construction
  • Factory Assembled & Tested
  • Quick Install & Easy Removal
  • Suitable for Rotary Joint Also
  • Multiple & Wave Spring Type
  • Metric and Inch Sizes Available
  • Independent of Direction of Rotation
BS700 [Semi Cartridge Seal (Rotary Bellow Type)]
BS700 [Semi Cartridge Mechanical Seal (Rotary Bellow Type)]
  • Rotary Bellow Type
  • Semi Cartridge Design
  • Factory Assembled & Tested
  • Metric And Inch Sizes Available
  • Quick Installation & Easy Removal
  • Independent of Direction of Rotation
  • With Connection of Flushing & Quenching
BS710 [Semi Cartridge Seal (Stationary Bellow Type)]
BS710 [Semi Cartridge Mechanical Seal (Stationary Bellow Type)]
  • Single Seal
  • Semi Cartridge Design
  • Stationary Bellow Type
  • Factory Assembled & Tested
  • Metric And Inch Sizes Available
  • Quick Installation & Easy Removal
  • Independent of Direction of Rotation
BC720 [Single Cartridge Seal (Rotary Bellow Type)]
BC720 [Single Cartridge Mechanical Seal (Rotary Bellow Type)]
  • Rotary Bellow
  • Single Cartridge Design
  • Factory Assembled & Tested
  • Suitable for API 682 4th Edition
  • Metric and Inch Sizes Available
  • Quick Installation & Easy Removal
  • Independent of Direction of Rotation
  • Come with connection of Flushing & Quenching
BC730 [Single Cartridge Mechanical Seal (Stationary Bellow Type)]
BC730 [Single Cartridge Mechanical Seal (Stationary Bellow Type)]
  • Single Seal
  • Cartridge Design
  • Stationary Bellow Type
  • Factory Assembled & Tested
  • Metric and Inch Sizes Available
  • Quick Installation & Easy Removal
  • Independent of Direction of Rotation
  • Come with connection of Flushing & Quenching
Retainer Type Single Spring Mechanical Seal
SS130 - SS135 (Retainer Type Single Spring Mechanical Seal)
  • Single Seal
  • Pusher Type
  • Internal Mounted
  • Single Helical Coil Spring
  • Balance & Un-Balanced Type
  • In Dependent on Direction of Rotation
  • Universal Chemical Compatibility due to PTFE Elastomer
BD740 [Double Cartridge Mechanical Seal (Inboard Bellow Type)
BD740 [Double Cartridge Mechanical Seal (In-board Bellow / Out-board Non-Bellow Type)]
  • Double Seal
  • Rotary Spring Type
  • Double Cartridge Design
  • Factory Assembled & Tested
  • Metric and Inch Sizes Available
  • Quick Installation & Easy Removal
  • Independent of Direction of Rotation
  • Come with connection of Cooling Arrangement
BD750 [Double Cartridge Seal (Inboard & Outboard Bellow Type)]
BD750 [Double Cartridge Mechanical Seal (Inboard & Outboard Bellow Type)]
  • Double Cartridge Design
  • Factory Assembled & Tested
  • Metric And Inch Sizes Available
  • Quick Installation & Easy Removal
  • Independent of Direction of Rotation
  • Come with connection of Cooling Arrangement
HP760 (High Pressure Mechanical Seal)
HP760 (High Pressure Mechanical Seal)
  • Single Seal
  • Multiple Spring Type
  • Cartridge Construction
  • Hydraulically Balance Type
  • Factory Assembled & Tested
  • Quick Install & Easy Removal
  • Metric and Inch Sizes Available
  • Independent of Direction of Rotation
  • Come with connection of Flushing & Quenching
  • Long Life because of Refurbishment Possibilities
LS810 [Light Duty Slurry Seal (Stationary Spring)]
LS810 [Light Duty Slurry Mechanical Seal (Stationary Spring Without Connection)]
  • Single Seal
  • Springs Isolated
  • Multiple Spring Type
  • Stationary Spring Design
  • Factory Assembled & Tested
  • Metric And Inch Sizes Available
  • Quick Installation & Easy Removal
  • Independent of Direction of Rotation
  • Hydraulically Line to Line Balance Type
  • Cartridge & Semi Cartridge Construction
  • Without Connection of Flushing & Quenching
MS820 [Medium Duty Slurry Seal (Stationary Spring with Connection
MS820 [Medium Duty Slurry Mechanical Seal (Stationary Spring with Connection)]
  • Single Seal
  • Springs Isolated
  • Multiple Spring Type
  • Stationary Spring Design
  • Hydraulically Balanced Type
  • Factory Assembled & Tested
  • Metric and Inch Sizes Available
  • Quick Installation & Easy Removal
  • Independent of Direction of Rotation
  • Cartridge & Semi Cartridge Construction
  • With Connection of Flushing & Quenching
HS860 [Heavy Duty Slurry Seal)
HS860 [Heavy Duty Slurry Mechanical Seal (Stationary Spring Type)]
  • Double Seal
  • Springs Isolated
  • Multiple Spring Type
  • Stationary Spring Design
  • Hydraulically Balanced Type
  • Factory Assembled & Tested
  • Metric and Inch Sizes Available
  • Quick Installation & Easy Removal
  • Independent of Direction of Rotation
  • Cartridge & Semi Cartridge Construction
  • With Connection of Flushing & Quenching
HS870 (Heavy Duty Slurry Seal)
HS870 [Heavy Duty Slurry Mechanical Seal (Rotary Spring Type)]
  • Double Seal
  • Springs Isolated
  • Multiple Spring Type
  • Stationary Spring Design
  • Hydraulically Balanced Type
  • Factory Assembled & Tested
  • Metric and Inch Sizes Available
  • Quick Installation & Easy Removal
  • Independent of Direction of Rotation
  • Cartridge & Semi Cartridge Construction
  • With Connection of Flushing & Quenching
LS830 (Light Duty Slurry Mechanical Seal)
LS830 [Light Duty Slurry Mechanical Seal (Rotary Spring)]
  • Single Seal
  • Springs Isolated
  • Multiple Spring Type
  • Stationary Spring Design
  • Factory Assembled & Tested
  • Metric and Inch Sizes Available
  • Quick Installation & Easy Removal
  • Independent of Direction of Rotation
  • Hydraulically Line to Line Balance Type
  • Cartridge & Semi Cartridge Construction
  • Without Connection of Flushing & Quenching
MS840 (Medium Duty Slurry Seal)
MS840 [Medium Duty Slurry Mechanical Seal (Rotary Spring with Connection)]
  • Single Seal
  • Springs Isolated
  • Multiple Spring Type
  • Stationary Spring Design
  • Hydraulically Balanced Type
  • Factory Assembled & Tested
  • Metric and Inch Sizes Available
  • Quick Installation & Easy Removal
  • Independent of Direction of Rotation
  • Cartridge & Semi Cartridge Construction
  • With Connection of Flushing & Quenching
SD900 (Single Dry Mechanical Seal)
SD900 / SD905 (Single Dry Mechanical Seal)
  • Single Seal
  • Top & Side Entry
  • External Mounted
  • Rotary Multiple Spring Type
  • Factory Assembled & Tested
  • Without Cooling Arrangement
  • With Bearing & Without Bearing
  • Very Cost Effective & Quick Delivery
  • Simple Installation and Maintenance
  • Independent of Direction of Rotation
  • Hydraulically Balanced & Un-Balanced Design
  • Non-Cartridge, Semi Cartridge & Cartridge Construction
placeholder-img
DD910 (Double Dry Mechanical Seal)
  • Top Entry
  • Double Seal
  • External Mounted
  • Cartridge Construction
  • Rotary Multiple Spring Type
  • Factory Assembled & Tested
  • Hydraulically Balanced Design
  • Simple Installation and Maintenance
  • Independent of Direction of Rotation
ES915 - ES920 (Single Wet Mechanical Seal)
ES915 - ES920 (Single Wet Mechanical Seal)
  • Single Seal
  • Without Bearing
  • External Mounted
  • Metal Free Contact Parts
  • Rotary Multiple Spring Type
  • Factory Assembled & Tested Unit
  • Independent of Direction of Rotation
  • Cartridge & Sem-Cartridge Construction
  • Hydraulically Balance & Un-Balance Type
  • Suitable for Top, Bottom & Side Entry Location
  • Liquid-Lubricated or Cooling Arrangement System Available
  • Non-standard sizes, special designs and material options are available on request
ES925 - ES930 [Single Wet Mechanical Seal)
ES925 - ES930 [Single Wet Mechanical Seal)
  • Single Seal
  • External Mounted
  • Cartridge Construction
  • Rotary Multiple Spring Type
  • Factory Assembled & Tested
  • Design with Bearing Assembly
  • Independent of Direction of Rotation
  • Suitable for Glass Lined Reactors also
  • Reversed Pressure Capabilities Inboard
  • Metal Free Contact Parts Option Available
  • Liquid-Lubricated or Cooling Arrangement
  • Hydraulically Balanced & Un-Balanced Type
  • Suitable for Top, Bottom & Side Entry Locations
  • Non-standard sizes, special designs and material options are available on request
ED935 - ED940 (Double Mechanical Seal)
ED935 - ED940 [Double Mechanical Seal (Without Bearing)]
  • Double Seal
  • External Mounted
  • Cartridge Construction
  • Metal Free Contact Parts
  • Top, Bottom & Side Entry
  • Rotary Multiple Spring Type
  • Factory Assembled & Tested
  • Independent of Direction of Rotation
  • Reversed Pressure Capabilities Inboard
  • Liquid-Lubricated or Cooling Arrangement
  • Hydraulically Balanced & Un-Balanced Type
  • Back-To-Back & Face-to-Face Seal Arrangement
  • Non-Standard Sizes, Special Designs and Material Options Are Available on Request
ED945 - ED950 [Double Seal (with Bearing)]
ED945 - ED950 [Double Mechanical Seal (with Bearing)]
  • Double Seal
  • External Mounted
  • Cartridge Construction
  • Metal Free Contact Parts
  • Top, Bottom & Side Entry
  • With Bearing Arrangement
  • Rotary Multiple Spring Type
  • Factory Assembled & Tested
  • Independent of Direction of Rotation
  • Reversed Pressure Capabilities Inboard
  • Liquid Lubricated or Cooling Arrangement
  • Suitable for Application in Explosive Areas
  • Back-To-Back & Tandem Seal Arrangement
  • Hydraulically Balanced & UN-Balanced Type
  • Non-standard sizes, special designs and material options are available on request
Load More..
Gipfel Engineering
Facebook Youtube Instagram Linkedin

QUICK LINKS

QUICK LINKS