Gipfel Engineering

Type : BD750

, , ,

Dual Metal Bellows Double Cartridge Mechanical Seal

The BD750 is a premium metal bellows double cartridge mechanical seal featuring both inboard and outboard welded bellows elements, engineered for critical high-temperature and hazardous process applications where maximum reliability, emission control and operational safety are mandatory. This non-pusher, elastomer-free dual-bellows configuration provides a fully cartridge-mounted solution that delivers consistent sealing performance in corrosive, thermally unstable and slurry-laden media.

The inboard metal bellows seal functions as the primary process seal, offering superior thermal stability, resistance to coking and excellent sealing performance under severe temperature fluctuations and chemically aggressive fluids typically encountered in hot-oil, thermic-fluid, hydrocarbon and solvent-handling duties. By eliminating dynamic elastomer movement along the shaft, the bellows design removes common pusher-seal failure modes such as O-ring hang-up, hardening and thermal degradation.

The outboard metal bellows seal acts as the containment or secondary barrier seal, providing an additional level of safety and redundancy. It is particularly effective in dual-seal systems operating with pressurised barrier (API Plan 53) or unpressurised buffer (API Plan 52) fluids, where tight process-leakage control and environmental compliance are vital. The dual-bellows arrangement delivers excellent pressure-handling capability and stable barrier-fluid circulation, supporting high integrity in hazardous, toxic or volatile services.

Supplied as a fully pre-assembled double cartridge, the BD750 ensures precise axial setting, simplified installation and reduced commissioning errors on refinery, petrochemical and power-generation equipment. Hydraulically balanced seal faces on both stages minimise face loading and heat generation, providing thermal stability and long service life under pressure fluctuations and thermal cycling commonly found in high-energy process pumps and other critical rotating machinery.

With its dual metal bellows construction, non-pusher design and API-compatible dual-seal capability, the BD750 offers a rugged, long-lasting sealing solution for high-temperature hydrocarbons, thermic fluids, fatty acids, volatile solvents and other aggressive process media in the most demanding industrial environments.

Key Features

  • Bi-directional operation, non-dependent on shaft rotation direction, provides installation flexibility across clockwise and counter-clockwise rotating equipment.
  • Industry-standard design for use with API, ANSI and ISO pump arrangements, available in both metric and inch shaft sizes to integrate seamlessly into new or existing installations worldwide.
  • Factory-assembled and pressure-tested cartridge design ensures precise axial setting, minimises installation and commissioning errors, and supports quick installation and easy removal to maximise plant uptime.
  • Integrated cooling, flushing and quench connections offer built-in ports for barrier fluid and cooling circuits, enhancing heat dissipation around the seal faces and extending seal life in high-temperature and high-duty applications.
  • Engineered for API process pumps, refinery units and other critical rotating equipment, providing state-of-the-art leak-tight performance, extended MTBF and reduced total cost of ownership in mission-critical services.
  • Double-seal arrangement is compatible with both pressurised (API Plan 53 variants) and unpressurised (API Plan 52) barrier/buffer systems, supporting stringent emission-control and containment requirements in hazardous and toxic services.
  • Robust metal-bellows technology delivers high corrosion and thermal-fatigue resistance, making the seal suitable for acidic, caustic and hydrocarbon-based media, as well as cyclic operation with frequent starts, stops and temperature swings.
  • Hydraulically balanced seal faces combined with the axial flexibility of the bellows deliver superior pressure-handling capability, reduced heat generation and stable operation across wide operating windows, including thermally unstable and high-viscosity fluids.
  • Double cartridge configuration with inboard and outboard metal bellows provides primary and secondary sealing in a fully integrated, pre-assembled unit, delivering high reliability for volatile, abrasive and environmentally hazardous media from vacuum up to high pressure.
  • Dual non-pusher metal bellows elements eliminate dynamic elastomers on both seals, reducing the risk of degradation or failure from thermal shock, chemical attack, swelling or secondary-seal hang-up, while offering excellent resistance to coking, crystallisation and polymerising fluids.

Service Overview

Parameter Value
Equipment API process pumps, thermic fluid pumps, refinery pumps, hydrocarbon transfer pumps
Fluid Hydrocarbons, thermic fluids, solvents, fatty acids, caustic and acidic media
Service Nature Hazardous, high-temperature, corrosive, volatile process service
Operating Mode Continuous duty with thermal cycling and pressure fluctuations

Specifications & Operating Limits

Parameter Min Max Notes
Shaft Size 25 mm / 1.000” 150 mm / 6.000” Larger sizes available on request
Pressure Vacuum 25 bar (363 psi) Depending on seal arrangement and API plan
Temperature -40°C (-40°F) +220°C (+428°F) Based on metallurgy and face selection
Speed — 2900 rpm Application dependent
Note: Limits are maximum values for individual parameters and are not simultaneous. Actual limits depend on the fluid, materials and seal size; contact Gipfel Engineering to confirm suitability for your duty.

Materials of Construction

Seal face pairs (standard pair: carbon vs silicon carbide)

Pair Face grades offered
Carbon vs silicon carbide Resin-impregnated or antimony-impregnated carbon graphite vs sintered or reaction-bonded silicon carbide
Carbon vs tungsten carbide Resin-impregnated or antimony-impregnated carbon graphite vs cobalt-bound or nickel-bound tungsten carbide
Silicon carbide vs silicon carbide Sintered or reaction-bonded silicon carbide on both faces
Silicon carbide vs tungsten carbide Sintered or reaction-bonded silicon carbide vs cobalt-bound or nickel-bound tungsten carbide
Tungsten carbide vs tungsten carbide Cobalt-bound or nickel-bound tungsten carbide on both faces
Component Standard Options
Metal bellows SS 316L AM-350; Hastelloy® C-276; Inconel® 718
Secondary seals Graphite; Flexible Graphite PTFE; Expanded Graphite
Hardware SS 316; SS 316L Duplex SS; Hastelloy® C-276; Titanium
  • Faces: hard-on-hard pairs for abrasive or solids-laden services; carbon vs silicon carbide for general duties.
  • Bellows and secondary seals: selected against temperature and fluid chemistry.
  • Metals: selected by corrosion level, chloride content and temperature.

Hastelloy® and Inconel® are registered trademarks of their respective owners.

Applications

  • Petrochemical process pumps
  • Refinery hydrocarbon transfer systems
  • Solvent recovery and distillation systems
  • Acidic and caustic media transfer systems
  • Thermic fluid and hot oil circulation pumps
  • High-temperature reactor circulation pumps
  • LPG and hazardous chemical processing plants
  • Vacuum residue and heavy hydrocarbon services
  • Nuclear and thermal power station auxiliary pumps
  • Biochemical and specialty chemical processing units

Recommended API Plans (Dual Seal)

Plan Purpose Typical use
Plan 52 Unpressurised buffer fluid from an external vented reservoir, circulated and cooled, for the outboard seal Where controlled leakage collection is acceptable and product dilution must be avoided
Plan 53A Pressurised barrier fluid from a gas-pressurised reservoir Hazardous, volatile or crystallising services needing zero process leakage to atmosphere
Plan 53B Pressurised barrier fluid from a bladder accumulator with cooler Higher pressures, where gas must be kept out of the barrier fluid
Plan 53C Pressurised barrier fluid from a piston accumulator referenced to seal chamber pressure Services with varying seal chamber pressure
Plan 54 Pressurised barrier fluid circulated by an external system Several seals on one system, or high heat removal

Plan 52 (unpressurised buffer) or Plans 53A, 53B, 53C and 54 (pressurised barrier) are selected by duty. For toxic or vaporising services, Plan 52 requires a prior risk assessment; otherwise a pressurised barrier plan is specified, with the barrier fluid kept at least 1.5 bar above seal chamber pressure. The plan is selected with the P&ID and project specification for each duty.

More Downloads

Frequently Asked Questions

  1. What shaft sizes does the BD750 cover?
    25 mm to 150 mm (1.000” to 6.000”). Metric and inch sizes are available.
  2. What are the operating limits of the BD750?
    Vacuum to 25 bar (363 psi); -40°C to +220°C (-40°F to +428°F), depending on secondary seal selection; and up to 2900 rpm. These limits are not simultaneous.
  3. What is the BD750?
    The BD750 is a premium metal bellows double cartridge mechanical seal featuring both inboard and outboard welded bellows elements, engineered for critical high-temperature and hazardous process applications where maximum reliability, emission control and operational safety are mandatory.
  4. Which API plans suit the BD750?
    Plan 52 with an unpressurised buffer fluid, or Plans 53A, 53B, 53C and 54 with a pressurised barrier fluid kept at least 1.5 bar above seal chamber pressure. The plan is selected by duty.
  5. Which seal face materials are available?
    Carbon vs silicon carbide is standard. Carbon vs tungsten carbide, silicon carbide vs silicon carbide, silicon carbide vs tungsten carbide and tungsten carbide vs tungsten carbide are also offered, in resin- or antimony-impregnated carbon graphite, sintered or reaction-bonded silicon carbide, and cobalt- or nickel-bound tungsten carbide.
  6. Which secondary seal and metal options are available?
    Bellows: SS 316L as standard, with AM-350, Hastelloy® C-276 or Inconel® 718 as options. Secondary seals: graphite or flexible graphite as standard, with PTFE or expanded graphite as options. Metal parts: SS 316 or SS 316L as standard, with Duplex SS, Hastelloy® C-276 or titanium as options.
  7. Where is the BD750 used?
    Petrochemical process pumps; Refinery hydrocarbon transfer systems; Solvent recovery and distillation systems; Acidic and caustic media transfer systems; Thermic fluid and hot oil circulation pumps; High-temperature reactor circulation pumps.
  8. Is an installation manual available?
    Yes. The Installation, Operation & Maintenance Manual is available under More Downloads; Annex A and B cover pressurised and unpressurised dual seals, and Annex D covers metal bellows seals.