Liquid Nitrogen & Cryogenic Systems
Process Overview
Liquid Nitrogen & Cryogenic Systems — Process Overview
Liquid nitrogen (LN2) is stored in vacuum-insulated tanks and pumped for tanker unloading, cylinder and dewar filling, food freezing, process cooling, inerting and vaporisation to gaseous nitrogen. At about −196 °C, conventional elastomer O-rings harden and crack, metals contract sharply, and moisture from the air freezes on any exposed seal surface. Cryogenic pump seals are designed around these three problems.
Primary Applications Covered:
- Bulk storage & transfer: tanker unloading and transfer from vacuum-insulated storage tanks.
- Filling: cylinder, dewar and cryogenic container filling.
- Vaporisation: booster pumps feeding ambient or steam vaporisers and high-pressure systems.
- Users: food freezing, laboratory and process cooling, inerting and blanketing.
What mechanical seal is used for liquid nitrogen pumps?
Liquid nitrogen pumps use cryogenic mechanical seals such as the Gipfel CS790, with a balanced, low-distortion face design and cryogenic-compatible secondary seals in place of standard elastomers, which lose flexibility at −196 °C. A dry nitrogen purge on the atmospheric side keeps moist air away from the seal so ice cannot form on the faces.
Engineering Notes
- Thermal contraction: the seal must keep controlled face loading as parts shrink during cool-down and recover at warm-up.
- Cool-down: pre-cool the pump and seal before start-up so the faces are not run with vapour (dry running).
- Icing: moisture freezing on the atmospheric side jams springs and faces; a dry nitrogen purge prevents it.
- Safety: nitrogen is non-toxic but displaces oxygen. Leakage in enclosed spaces is an asphyxiation hazard, so pump areas need ventilation and oxygen monitoring per site rules.
Root-Cause Failure Analysis — Field Example
Symptom: LN2 transfer pump seal leaks after start-up; frost and ice on the gland.
├── Diagnostic Evidence Required:
│ ├── Was the pump started before full cool-down (vapour at the faces)?
│ ├── Is ice forming on the atmospheric side from moist air?
│ ├── Are standard elastomer O-rings fitted (hard and cracked at −196 °C)?
└── Engineered Solution:
├── Fit a cryogenic seal with cryogenic-compatible secondary seals.
├── Add a dry nitrogen purge on the atmospheric side.
├── Follow a controlled cool-down procedure before starting the pump.
Frequently Asked Questions
Why can’t standard O-rings be used in liquid nitrogen?
Standard elastomers pass their glass-transition temperature far above −196 °C, so they become rigid and brittle and can no longer seal. Cryogenic seals use secondary sealing materials designed for these temperatures.
Why does a liquid nitrogen pump seal need a nitrogen purge?
The seal is far colder than the surrounding air, so moisture condenses and freezes on it. A dry nitrogen purge on the atmospheric side keeps the area dry and prevents ice from jamming the seal.
Request a Seal Selection
Send your pump make and model, liquefied gas, pressure, shaft size and speed to info@gipfelengg.com or use our enquiry form. Related: industrial refrigeration, oil & gas (LPG). Gipfel Engineering (ISO 9001:2015, NSIC-registered MSME, Mumbai) designs and manufactures mechanical seals, seal support systems and process pumps.
Equipment solutions: Overhung Pumps · Vertical & Can Pumps.
Pump Duty & Mechanical Seal Selection Matrix
Liquid nitrogen boils at about −196 °C at atmospheric pressure. Pressure and speed are per pump design; final selection is made against the pump data sheet.
| Pump duty | Fluid | Typical temp. | Pressure | Seal | Secondary sealing | Atmospheric-side protection |
|---|---|---|---|---|---|---|
| LN2 Tanker Unloading Pump | Liquid nitrogen | About −196°C | Per pump design | CS790 Cryogenic Seal (balanced, low-distortion faces) | Cryogenic-compatible, non-elastomeric secondary seals | Dry nitrogen purge / quench (Plan 62) to keep moisture away and prevent icing |
| LN2 Transfer / Filling Pump | Liquid nitrogen | About −196°C | Per pump design | CS790 Cryogenic Seal (balanced, low-distortion faces) | Cryogenic-compatible, non-elastomeric secondary seals | Dry nitrogen purge / quench (Plan 62) to keep moisture away and prevent icing |
| LN2 Booster Pump (feed to vaporiser or high-pressure pump) | Liquid nitrogen | About −196°C | Per pump design | CS790 Cryogenic Seal (balanced, low-distortion faces) | Cryogenic-compatible, non-elastomeric secondary seals | Dry nitrogen purge / quench (Plan 62) to keep moisture away and prevent icing |
Reviewed by Gipfel Engineering’s technical team.
Technical Information Disclaimer
The information on this page, including process descriptions, flow diagrams, operating ranges, seal arrangements, materials and piping plans, is general technical guidance for information only. Values shown are typical industry ranges, not guaranteed ratings or specifications of any Gipfel Engineering product. Each application differs. Seal selection, material compatibility, installation and operation must be verified by qualified personnel against the specific equipment data sheet, process conditions, applicable codes and the pump manufacturer’s instructions. A binding recommendation is given only in a written quotation or technical offer from Gipfel Engineering.
References to standards (such as API 682, ISO 21049, ISO 3069, FDA 21 CFR 177.2600 and NACE MR0175 / ISO 15156) describe common industry practice. They do not mean that any product is certified, qualified or approved to that standard unless this is confirmed in writing for a specific order. Third-party company and product names, including “equivalent to” references, are used for identification only and remain the trademarks of their owners. No affiliation, endorsement or OEM approval is implied.
Compliance with safety, hazardous-area, environmental and statutory requirements at the user’s site remains the responsibility of the plant owner or operator. To the extent permitted by law, Gipfel Engineering accepts no liability for loss or damage arising from reliance on this general information without a confirmed written recommendation. Content may change without notice.